High-end MMO Coach for Sale

Equipped with cutting-edge technology, high-end mammography coach provides top-notch mammography services with aims to overcome geographical barriers and increase accessibility to breast cancer screening. Mammography coach travels to various locations such as rural communities, workplaces, and community events, reaching women who may otherwise face difficulties accessing screening facilities.

With its advanced features and on-the-go capabilities, High-end MMO coach is a perfect solution for healthcare providers looking to extend their services beyond traditional settings.

High-end mammography coach is available for sale as per the following specifications:

High end MMO Coach For Sale Floor Plan

Specifications:

Chassis: Freightliner model # XCR W/TAG AXLE (CDL required)
Engine: 400 HP ISL HP at 2100 RPM, 1200 lb/ft torque with 372,649 well maintained miles
Block Heater: Yes
Alternator: 160 Amps
Transmission: Allison 3000MH Automatic
Brake System: Air / ABS
GVWR: 44600 lbs
Suspension: Front and Rear Air Ride
Wheelbase: 282” (approximate)
Axles: 14160# Front; 21,000# Rear drive, 10000# Tag
Fuel Capacity: 100 Gallon
Cruise Control: Included
Steering: Tilt/Telescoping Wheel
Wheels: Aluminum wheels
Tag Axle: 10000#

Floorplan and Features:

45’ Long x 102” wide outside dimensions.
Waiting/ Reception area with three chairs in waiting area
Entry door with built-in wheelchair lift per drawing #1001236 .
Two private dressing rooms
Mammography Diagnostic suite w/ customer furnished mammography system
Private conference /materials storge area

Selling price

$215,000.00

Please Note: The price is valid that until 12-31-2023, after this date call to confirm the price.

Interested In: Renting Buying

Toilet required?

Wheel chair required?

Lead Lining Required?

I would like to receive newsletter from KB Consulting.

BODY CONSTRUCTION:

Floor:

4” High strength aluminum trailer I-beams with custom aluminum lower body rail bolted together to form a contiguous floor structure
10” aluminum junior channel or equivalent welded to underside of 4” aluminum I-Beams with reinforcements on 48” centers
Under belly shall be skinned with .040 aluminum as required, riveted and sealed watertight with 3/16 aluminum rivets 4” to 6” on centers with Manus Sealant.
Sub floor shall be continuous 1/2” FRP with sealed edges to prevent moisture intrusion installed with ¼” plated steel flathead floor screws on 16” centers.

Compartments:

All underbelly storage compartments are 1/8” aluminum.
AAll compartment doors shall be 1/8” aluminum or 3/16” gelcoated fiberglass with aluminum continuous hinge and stainless steel hinge pin using sealed shelter-lite covers over hinges and riveted to compartment. Doors shall have compression seals on edges for maximum sealing features. Shelter-lite shall be sealed with black silicone
Southco thumb pull with adjustable twist-lock security key shall be installed on each door. All keys keyed alike.

Skirting:

All skirting shall be 1/8” aluminum or 3/16” gelcoated fiberglass and shall be riveted in place using 3/16 aluminum rivets.

Exterior roof / interior ceiling and exterior sidewalls/ interior walls:

Exterior surface shall be smooth fiberglass gel-coat .014-.018 thick.
Thermo-vacuum bonded to ¼” (minimum) thickness exterior continuous plywood.
Thermo-vacuum bonded to a 2” insulated foam core
Thermo-vacuum bonded to 1/4” interior continuous plywood sheet.
Interior wall surface is.014-.018 gel-coat with 20 oz. Commercial vinyl wall paper The total thickness of wall shall equal 2.65 inches minimum.
Dropped ceiling with no flake ceiling panels.
Notes:
- Aluminum 2” square tube with .083” wall thickness perimeter frame on 26” centers shall be thermo- vacuumed bonded into ceiling, sidewall structures, and door frame openings. Door frame openings to be double thickness
- All corner junctions shall have MCI’s .125 minimum wall thickness custom aluminum extrusions
- R-factor shall equal 21 for ceiling and 14 for side walls, R-factor shall equal R-21 for floor
- 3” radius aluminum extruded corner cap riveted and sealed on all 4 corners.
- Wheel Chair lift: Braun Modes UVL# 8555M (Under Vehicle Lift mounted in Step at entry door).
- All aluminum mill finish shall be epoxy primed and painted with two coats of urethane commercial paint. Color: winter white

SYSTEMS

Electrical:

12 Volt DC and 110 Volt AC system
100 amp Distribution Panel and Circuit Breakers
22.5 KW Martin Diesel generator with 3586 well maintained hours and insulated extra quiet generator compartment
Generator remote start panel with gauges to include frequency, amps voltage, water temperature, and oil pressure
Electrical Transfer switch (Shore / Off / Generator)
Shore power system with 100 AMP cord (45’)
Power panel and breakers with outlets. All wiring per NEC and RVIA code
110 VAC Lighting: 2 Tube and 4 tube fluorescent troffer lights as required with electronic ballast
12VDC Lighting: Emergency battery back-up interior lighting (3), Exterior lighting(1), storage compartments (3): (Hydraulic, electrical, and generator)

Hydraulics:

(4) Hydraulic Jacks; Semi-Automatic with Touch Pad Control

Heating, Ventilation, and Air Conditioning:

36,000 BTU Central Air Conditioning system with 15 Kw Electric Heat, rear wall mount

Computer / Communications:

Pre-wire for telephone (3)
Pre-wire for computer

INTERIOR DECOR

Floor covering: Commercial vinyl wood plank
Wall covering: Commercial Vinyl Wallpaper (20 oz.)
Overhead and Base Light Oak cabinets per drawing #1001236. Cabinetry to include chrome positive twist latches to secure cabinet doors during transit.
Electrical outlets, switches, and covers color: White
Interior doors Oak (6) panel stained to match cabinets
Interior Trim Oak panel to match cabinets
Ceiling: White with pebble finish, no flake panels
Leaded mammography suite wall and doors

MISCELLANEOUS

Entry: Color co-coordinated gel-coated Fiberglas non-skid step well entry with interior and exterior handrail
Entry Door: 1-3/4” thick 48” wide commercial insulated steel door w/ (2) 7” X 24” tempered glass and commercial stainless steel lock. Mounted with continues stainless steel hinge and Shelter lite using MCI European design aluminum frame, drip lip and threshold.
Back-up alarm
Fire extinguisher 5# ABC with mounting bracke(2)t
First aid kit / triangle reflector kit
Am-Fm-Cd stereo system with (6) speakers
Lockable compartment
Back-up Camera
Fiberglas front cap and bumper
Fiberglas wheel well opening
Fiberglas color co-ordinated dash
(2) Side windows w/color co-ordinated day/nite blinds per drawing #1001236.

TERMS:

Milestone payment schedule
40% Down
Balance upon completion

Note: All payment must be Via bank transfer

Completion:

30 days after receipt of all of the following:
Receipt of deposit
Balance upon completion